Integrated Chassis Version
For AL-KO chassis manufactured from 2010, mounting holes are provided as standard allowing simple installation. This type of chassis is identified by an embossed 'M', located on the chassis member (as shown below). The AL-KO AMS Mammut can be fitted in front of the axle, thereby protecting the drive units from stone chip damage. The compact design and integration of the unit into your AL-KO chassis ensures that the clearance between the chassis member and the road is completely unaffected.
- Chassis: 2010 Model AL-KO chassis with embossed 'M'
- Fitting: In front of Axles
- Part Number: 1224844
- Net Weight 29kg
- Max Ground Clearance: Yes
- Max MTPLM 2,250kgs Single or Tandem Axle
- Max Incline:
Total Weight 2,250kgs = 13% incline
Total Weight 1,800kgs = 16% incline
Total Weight 1,300kgs = 28% incline
- Soft Start/Stop: Yes
Under Chassis Version
For older AL-KO chassis prior to 2010 model year and non AL-KO chassis, a version with the cross bar clamped under the chassis members is available. This version can be fitted either in front or behind the axle. Clearance between chassis member and road is reduced by approximately 50mm.
- Chassis: All previous AL-KO and Non AL-KO chassis
- Fitting: In front or behind Axle
- Part Number: 1224846
- Net Weight 36kgs
- Max Ground Clearance: Reduced by 50mm
- Max MTPLM 2,250kgs Single or Tandem Axle
- Max Incline:
Total Weight 2,250kgs = 13% incline
Total Weight 1,800kgs = 16% incline
Total Weight 1,300kgs = 28% incline
- Soft Start/Stop: Yes
